| Dozer on his new home ground
| Time to practice on level ground
| Dozer helps pile dropped timber for the chipper
|
Starting prep for Dozer's Shed
| Carefull layout and hand work
| Making access for electric line
|
Finishing augar dug holes by hand
| Mike digs power line trench from Machinery Barn to Cabin
| Finished trench |
Great help from Cody & Randy pouring the piers
| Pouring piers
| Setting post brackets in concrete
|
Empty contrete bags represent >3500 pounds of dry mix
| Not pretty but the post brackets are level and straight
| Temporary electricity outlet at barn
|
Temporary, intermittent power connection at Cabin
| High of 21 degrees & 8-1/2 inches of snow slowed us a bit
| 11/29 work resumes as Shawn & Greg start above ground work. Greg plumbs a corner post.
|
Shawn & Greg hoist a beam
| Shawn lifts end beam. Glad we got some help!
| Greg places wall studs
|
Wall siding
| Roof trusses
| Walls up, roof sheathed, sun about to set
|
11/30 Shawn nails end wall (ends open below beam)
| Windows in, vertical wall trim
on, roof underlayment on
| Eave trim
|
Metal roof & trim almost
finished
| 11/30 "Dozer" spends 1st night in new shed. (Greg returned 12/3 to finish last shed items)
| 1/7/14 it warmed up enough to stain. Zane applies finishing touches
|
Dozer Shed blends in pretty well behind Machinery Barn
| With luck, power to Shed will Flow through that wire in conduit from the Barn
| Lets see - do we really need that many wires in 1 switch box?
|
Pulling wires to subpanel site in Barn
| Securing cable in Barn
| Happy dance after Barn wiring passed continuity test
|
EXTREMELY temporary Shed circuit test connection (Shed circuit passed too)
|
|
|
|
|
|
|
|
|
|
|
|